| Bulk Discounts |
 |
Number |
|
Unit Price |
|
Single Purchase |
-> | $22.54 |
|
10 or more |
-> |
$21.71 |
|
40 or more |
-> |
$20.00 |
|
1000000000 or more |
-> |
$19.97 |
Connexx Do-It-Yourself WITHOUT TOOLS LED Lighting Kit!
AS SEEN ON EXTREME MAKEOVER HOME EDITION!
Our under cabinet LED led track lighting kit by Connexx Illuminetrix is as easy as 1-2-3! This do-it-yourself lighting kit offers easy installation and requires only a pair of scissors to cut the wire. NO OTHER TOOLS OR EXPERIENCE IS NEEDED TO ADD BRIGHT WHITE LIGHT TO ANY SPACE!
Connexx LED Light Strips use white LEDs that are color corrected to match the glow of incandescent lights. Ideal for lighting cabinets, toe kicks, above and under cabinets, task lighting in the garage or office and can be used for 12 volt applications such as boats, RVs, mobile homes, automotive, etc.
The bright, super efficient LED lights use less than 1 watt of power! These lights use 9 times less energy than a standard incandescent with the same light output! How's that for energy savings! The super strong LED's will last 25 years and generate NO HEAT so they are safe to touch while in use.
Each Kit Contains:
- Two (2) Light Strips With Four (4) LED's Each for a Total of Eight (8) LED Lights.
- 1 On/Off Switch
- 1 Power Plug
- Wire Kit
- For Residential, Commercial and Industrial applications.
- Optional Mounting Screws (Kit can be installed with sticky pads which are included!)
Here are the instructions exactly as they appear on the package. It is easy to create professional looking lighting at a fraction of the cost of paying someone to do it for you!
1. Measure the length of wire you will need between each light, and between the first light and switch. Add 2" extra to fit the connectors. You don't need to remove any wire insulation.
2. Remove lenses and switch cover by gently bending back the ends of the unit. Lift the lenses and switch cover off, then grasping the exposed inner edge, lift off the caps.
3. Using finger pressure, press the wires firmly into the slots in the Wire Guides. NOTE: One slot is marked by a dot. Be sure to always use the same color wire in all marked slots.
4. Put the Caps back on one by one, carefully aligning them in their guides. Press each Cap down firmly until it snaps in place. This will connect the wires.
5. Snap the Lenses and Switch Cover back on. It's time to test your Connexx Lighting System before installing. Plug the power plug into a regular 110V outlet, and fit the miniature connector into its receptacle on the Connexx Switch. Pressing the switch will turn the lights on and off. Don't worry - you can't get a shock from the Connexx lights and switch.
Each under cabinet LED Lighting set comes with a 3-year warranty and a 25 year lifespan!
Suggested retail price: $29.95
1.25 pounds each, Item SK-1
|
